Deluxe Hanbo (91 cm) - Classic Woods
SKU: W501V
Product Customizations
Weapon Engraving Services
| Available fonts (style) | 4 Japanese fonts, 3 English fonts |
|---|---|
| Depth | The stronger the laser, the deeper the engraving. Superficial is quite discreet, standard is deep enough to stand forever, deep can go up to 1 mm depth and creates a burning effect within the engraving. |
| Free transcriptions | You can write your name in English and select a "Japanese" font, in which case we will take care of the transcription. Note that several translations exist for the same name and that we cannot accept claims. (Please use the text field to add a comment if the pronunciation is unusual. If you already have a translation, please attach a picture). We do not translate expressions or initials, only names or words. Requests for expressions translations will be ignored and refunded. Please also note that initials cannot be translated in Japanese. Consequently, they will always be engraved in English. |
| Number of engravings |
You can order a maximum of 3 engravings per weapon from this page. The modules N1, N2, and N3 correspond to the engravings Number 1, number 2 and number 3. These modules are identical and you can add them in the order you wish. Of course, we cannot engrave twice in the same place, so please pay attention to the chosen positions. For more than 3 engravings, please contact us prior to placing your order. |
| Limitations | We engrave in Japanese and English only (no Chinese, Korean, etc.) For any special request (logo/design), contact us prior to your order. (Undiscussed demands will be ignored). |
| More information | Embroidery workshop & Japanese free translation (on site), Transcription usages (Seido Blog), and the engraving workshop presentation (Youtube) |
Order today and we will ship before
Prices vary depending on selected options.
Service details
Jo, Bo & Hanbo Laser Engraving - N°1
Order today and we will ship before
Prices vary depending on selected options.
Service details
Jo, Bo & Hanbo Laser Engraving - N°2
Order today and we will ship before
Prices vary depending on selected options.
Service details
Jo, Bo & Hanbo Laser Engraving - N°3
Recommended Accessories
Prices vary depending on selected options.
Camellia Oil - Tsubaki abura
Made in Japan (Isu Islands)
Ingredient: 100% Tsubaki Oil
Size: 70 mL (2,3 oz) / 118 mL (3.9 oz) / 1 L (33.8 oz) / 1.8 L (60.9 oz)
This oil has been produced on the island of Toshima (Isu Shoto), off Tokyo, for more than a century. It is used by many Japanese wood workers as well as specialists in ancient blade (shinken) who are looking for a more stable oil than the Choji oil.
The 70 and 118 mL are conditionned in glass bottles. 1 and 1.8 L are conditionned in metal cans. Cans are not available in stock and require about a week before shipping.
Treatment with Camellia oil is recommended by the craftsmen who make our wooden weapons. The regular oiling is necessary for unvarnished weapons. It is recommended also for the maintenance of Iaito and Shinken.
Utilization on wooden weapons:
Once every 2 months in the wet season, 2 times per month during dry season. For a better preservation of your weapons, it is advisable to carefully rub them with a dry cloth after each use. When you apply the oil, clean the wood surface by rubbing vigorously with a dry cloth, then apply the oil in a thin layer directly with the hand. Allow to dry.
If your weapons are not painted it will not be necessary to sand, but if they are, sanding will help the wood to absorb more oil.
Note that this Camelia oil is initialy intended for skin and hair care. We've selected this oil for it's unmatched quality: 100% pure camelia oil, no additive, cold pressed, cosmetic grade, almost odorless, and halal certified.
Product Information & Size Chart
-
Classic Hanbo - 3 Shaku
Made in Japan (Kyushu region)
Available woods: Red Oad, White Oak
Length: 3 shaku (90.9 cm) | Diameter: 24 mm, 27 mm or 30 mm.
Finish : urethane coating or oil polishing
This classic Hanbo is available in Ichiikashi (red oak) or Shirakashi (white oak), either varnished or unvarnished (oil polishing). The standard length is 3 shaku (90.9 cm), with 3 different diameters to chose from.
Although it is not conventionally used in Aikido, the Hanbo is however an excellent tool for training on shomen or yokomen strikes from a mid-distance. It is therefore widely used in self-defense oriented Aikido classes.
The standard thickness is 24 mm (8 bu), but the 27 and 30 mm models are designed to work on tanren (reinforcement). The 27 mm model is very strong, which also makes it a great Hanbo practice with very violent contacts.
- Choice of wood species: red oak, white oak.
- Diameter: 24 mm (8bu), 27 mm (9bu) or 30 mm (1 sun).
- Available finish: Urethane varnish or camellia oil polish.
- Manufacturing workshop: Horinouchi, Aramaki or Nidome
Non varnished - Oil polish option:
Urethane varnish is the "classic" finish for wooden weapons. This varnish protects the wood from moisture or drought, but touch is less pleasant than that of unvarnished weapons. When wood is not varnished, it is necessary to treat regularly (every two months on average) with oil (camellia or walnut oil or linseed oil). Unvarnished weapons are meticulously polished with a fine grain sandpaper, which in addition to the oiling work done by our team before shipping, justifies the extra charge. Only quality weapons can withstand a Japanese oil finish instead of varnishing. This is the finish we recommend to the most demanding practitioners.
Classic Hanbo - Weights Wood Ichiikashi (Red Oak) Shirakashi (White Oak) 8 bu = 24 mm ~390 g ~430 g 9 bu = 27 mm ~430 g ~500 g 1 sun = 30 mm ~500 g ~600 g *Weapons are all handmade and therefore, color can vary slightly
-
-
Customer Reviews
Based on 16 reviews Write a review
Product & Services
Accessories
Order today and we will ship before
Order today and we will ship before
