Hanmaru Tonfa (Semicircular) - Red Oak

Average rating: 4.8/5 View/write review(s)
From 4 workshops in 2019, the wooden weapon industry in Japan is now reduced to one workshop at full capacity and one workshop with reduced capacity. Stock shortage are more and more common, so please make sure to check the availability displayed above the add to cart button upon options selection. Feel free to read our blog article for more information on the situation.

Product Options

This combination is unavailable. We have reset the options.
Made to Order | Production: ~
Order today and we will ship before
In stock: ships within 2 working days
Order today and we will ship before
Availability : around (Shipping date estimation)
As we are not able to guarantee the next availability for this product, orders are temporarily suspended. We invite you to come back check the availability around
This product is out of stock and discontinued. It cannot be ordered any longer.
Sold out
Translation missing: en.product.too_much_item_cart_or_selected
Prices vary depending on selected options.
Select all product options to unlock
the 'Add To Card' button
The quantity selected is superior to stock availability, reduce quantity to unlock add to cart.
Or customize this item below

Product Customizations

Weapon Engraving Services

Available fonts (style) 4 Japanese fonts, 3 English fonts
Depth The stronger the laser, the deeper the engraving. Superficial is quite discreet, standard is deep enough to stand forever, deep can go up to 1 mm depth and creates a burning effect within the engraving.
Free transcriptions You can write your name in English and select a "Japanese" font, in which case we will take care of the transcription. Note that several translations exist for the same name and that we cannot accept claims. (Please use the text field to add a comment if the pronunciation is unusual. If you already have a translation, please attach a picture). We do not translate expressions or initials, only names or words. Requests for expressions translations will be ignored and refunded. Please also note that initials cannot be translated into Japanese. Consequently, they will always be engraved in English.
Number of engravings You can order a maximum of 3 engravings per weapon from this page. The modules N1, N2, and N3 correspond to the engravings Number 1, number 2, and number 3. These modules are identical and you can add them in the order you wish. Of course, we cannot engrave twice in the same place, so please pay attention to the chosen positions.
For more than 3 engravings, please contact us prior to placing your order.
Limitations We engrave in Japanese and English only (no Chinese, Korean, etc.) For any special request (logo/design), contact us prior to your order. (Undiscussed demands will be ignored).
More information Engraving Information & Japanese free translation (on site), Transcription usages (Seido Blog), and the engraving workshop presentation (Youtube)
¥1,200 ~ ¥5,200
Made to Order | Production: ~ | No Exchanges/Refunds
In stock: ships within 2 working days
Order today and we will ship before
Availability : around (Shipping date estimation)
As we are not able to guarantee the next availability for this product, orders are temporarily suspended. We invite you to come back check the availability around
This product is out of stock and discontinued. It cannot be ordered any longer.
Sold out
¥1,200

Prices vary depending on selected options.

?
?
?
This combination is unavailable. We have reset the options.
?
?
?
Please check the selected 'word count' matches the content entered. "<span class="words"></span>" is (are) considered as one word (each).
Attention: logo embroidery must be discussed prior to placing your order. Undiscussed demands will be ignored and refunded without notice.

Service details
Tonfa Laser Engraving N°1

  • Position: Bottom, center or top (we recommend the center)
  • Side: left or right side (when the Tonfa is hold protecting your forearm).
  • Letter size: standard (~7.5 mm), big (~10 mm), extra big (12 mm).
  • Maximum 2 engravings per Tonfa.
  • ¥1,200 ~ ¥5,200
    Made to Order | Production: ~ | No Exchanges/Refunds
    In stock: ships within 2 working days
    Order today and we will ship before
    Availability : around (Shipping date estimation)
    As we are not able to guarantee the next availability for this product, orders are temporarily suspended. We invite you to come back check the availability around
    This product is out of stock and discontinued. It cannot be ordered any longer.
    Sold out
    ¥1,200

    Prices vary depending on selected options.

    ?
    ?
    ?
    This combination is unavailable. We have reset the options.
    ?
    ?
    ?
    Please check the selected 'word count' matches the content entered. "<span class="words"></span>" is (are) considered as one word (each).
    Attention: logo embroidery must be discussed prior to placing your order. Undiscussed demands will be ignored and refunded without notice.

    Service details
    Tonfa Laser Engraving N°2

  • Position: Bottom, center or top (we recommend the center)
  • Side: left or right side (when the Tonfa is hold protecting your forearm).
  • Letter size: standard (~7.5 mm), big (~10 mm), extra big (12 mm).
  • Maximum 2 engravings per Tonfa.
  • Product Information & Size Chart

    • Hanmaru Tonfa - Semicircular - Red Oak

      Made in Japan (Kyushu)
      Red Oak only
      Urethane Varnished
      Total length: 44 cm
      Sold by unit (1) or by pair (2)

      Hanmaru means 'semicircular' and refers to the shaft's shape, rounded on the external side of the Tonfa. Its dimensions are based on the squared shaft model. The semicircular shaft allows smoother parrying whilst the shaft is kept thick enough to withstand heavy contacts. This Tonfa is a bit lighter than the square model, but still significantly heavier than the very light rounded model.

      Tonfa length: The handle is fixed at about 8 cm to 9 cm from the tip, which means that on a 44 cm Tonfa, you will have about 34 cm in length from the handle to your elbow.

      Handle size: The handle full length is 11 cm, including the knob that prevents the Tonfa from slipping when performing motion techniques. First of all, measure your hand's width, at the level of the knuckles, with the hand stretched out on a table. For the standard handle: hand width up to 9 cm.

      Hanmaru Tonfa Specifications
      Wood Ichiikashi/Akagashi
      (Red Oak)
      Weight 540 g ~ 570 g
      Full length 44 cm
      Section size 48 mm x 31 mm
      Handle length ~11 cm
      Handle diameter (at its center) ~27 mm

      * Due to the hand-made manufacturing, color and weight may vary from one weapon to another

      Tonfa Order Disclaimer

      Tonfa can be considered as weapons in some countries. Although, by experience, we know there is no problem with North America and most European countries, we recommend checking that the import of Tonfa is not prohibited in your country before placing your order.
      Tonfa are made to order and Seido shall not be held responsible for any difficulties, import refusal or other trouble at customs clearance. In the event of this occurring, only limited refunds (depending on the level of customization) can be granted.
      Also, please note that due to international payment regulations, PayPal payment is not available at checkout when ordering a Tonfa or a Nunchaku. If you wish to purchase other products at the same time and use PayPal, we recommend to order the Tonfa or Nunchaku separately. We can still ship all items together if the orders are placed within a few hours and a comment is added in the comment field.
    • Customer Reviews

      Based on 4 reviews Write a review
    Set total price:
    Select product options to display the total price.
    All mandatory fields must be filled.

    Product & Services

    Hanmaru Tonfa (Semicircular) - Red Oak: ¥7,000
    Bokken Laser Engraving - N°1: ¥1,200
    Bokken Laser Engraving - N°2: ¥1,200
    Bokken Laser Engraving - N°3: ¥1,200
    Shoto Laser Engraving - N°1: ¥1,200
    Shoto Laser Engraving - N°2: ¥1,200
    Shoto Laser Engraving - N°3: ¥1,200
    Jo, Bo & Hanbo Laser Engraving - N°1: ¥1,200
    Jo, Bo & Hanbo Laser Engraving - N°2: ¥1,200
    Jo, Bo & Hanbo Laser Engraving - N°3: ¥1,200
    Tanto Laser Engraving - N°1: ¥1,200
    Tanto Laser Engraving - N°2: ¥1,200
    Tanto Laser Engraving - N°3: ¥1,200
    Katanakake Laser Engraving - N°1: ¥1,200
    Katanakake Laser Engraving - N°2: ¥1,200
    Nunchaku Laser Engraving N°1 - First Branch: ¥1,200
    Nunchaku Laser Engraving N°2 - First Branch: ¥1,200
    Nunchaku Laser Engraving N°1 - Second Branch: ¥1,200
    Nunchaku Laser Engraving N°2 - Second Branch: ¥1,200
    Tonfa Laser Engraving N°1: ¥1,200
    Tonfa Laser Engraving N°2: ¥1,200
    Kenju Laser Engraving N°1: ¥1,200
    Kenju Laser Engraving N°2: ¥1,200

    Accessories

    Made to Order | Production: ~ | No Exchanges/Refunds
    Order today and we will ship before
    In stock: ships within 2 working days
    Order today and we will ship before
    Availability : around (Shipping date estimation)
    As we are not able to guarantee the next availability for this product, orders are temporarily suspended. We invite you to come back check the availability around
    This product is out of stock and discontinued. It cannot be ordered any longer.
    Sold out
    You can switch the currency (USD, EUR, CAD, etc.) and the metric system sitewide by using our tools menu, accessible from the tools button at the top right-hand side of the site.
    Subscribe to our mailing list

    1~2 emails a month. We never share your data with anyone!