|Available fonts (style)||4 Japanese fonts, 3 English fonts|
|Depth||The stronger the laser, the deeper the engraving. Superficial is quite discreet, standard is deep enough to stand forever, deep can go up to 1 mm depth and creates a burning effect within the engraving.|
|Free transcriptions||You can write your name in English and select a "Japanese" font, in which case we will take care of the transcription. Note that several translations exist for the same name and that we cannot accept claims. (Please use the text field to add a comment if the pronunciation is unusual. If you already have a translation, please attach a picture). We do not translate expressions or initials, only names or words. Requests for expressions translations will be ignored and refunded. Please also note that initials cannot be translated in Japanese. Consequently, they will always be engraved in English.|
|Limitations||We engrave in Japanese and English only (no Chinese, Korean, etc.) For any special request (logo/design), contact us prior to your order. (Undiscussed demands will be ignored).|
|More information||Embroidery workshop & Japanese free translation (on site), Transcription usages (Seido Blog), and the engraving workshop presentation (Youtube)|
Prices vary depending on selected options.
Tonfa Laser Engraving N°1
Prices vary depending on selected options.
Tonfa Laser Engraving N°2
Product Information & Size Chart
Kujiragata Tonfa - Red Oak
Made in Japan (Kyushu)
Red Oak only
Available in 43 cm, 46 cm, 49 cm and 52 cm
Sold by unit (1)
The Kujiragata Tonfa is a slight variation of the standard squared shaft model. "Kujira" means "whale" and "Gata" form, and it refers to the rounded ends of the Tonfa, resembling a whale's head. The rounded ends allow a safer training, especially for striking techniques and slightly lightens the weapon. This Tonfa is a good choice if the square model is a bit too heavy but you still want a Tonfa heavy enough to have a lot of striking power.
Since it is usually recommended to adapt the length of the Tonfa to ones forearm (a few centimetres past the elbow when gripped), we offer 4 different sizes: 43 cm, 46 cm, 49 cm and 52 cm
A concern that we are often asked about by Westerners is the size of the handle. We therefore offer 2 different sizes, standard and large. The large size presents a slightly longer and thicker handle (by about 10%).
Tonfa length: The handle is fixed at about 9 cm to 10 cm from the tip, which means that on a 43 cm Tonfa, you will have about 33 cm in length from the handle to your elbow.
- 43 cm Tonfa > up to 33 cm to elbow
- 46 cm Tonfa > up to 36 cm to elbow
- 49 cm Tonfa > up to 39 cm to elbow
- 52 cm Tonfa > up to 42 cm to elbow
Depending on your school and preferences, you might want to go one size longer.
Handle size: The handle full length is 12 cm, including the knob that prevents the Tonfa from slipping when performing motion techniques. First of all, measure your hand's width, at the level of the knuckles, with the hand stretched out on a table and refer as follow:
- Standard handle: hand width up to 9 cm.
- Large handle: hand width up to 11 cm.
Non varnished - Oil polish option:
All our high-end weapons are available either varnished with urethane or polished with camellia oil. The latter is more pleasant to the touch and these unvarnished weapons are also more ecologically-friendly, but they require regular (monthly) maintenance with oil (camellia or wood maintenance oil). Further, they can only be made from the finest timber of Japanese quality. Given the need for maintenance, our stocks are limited. Also, since the craftsmen must select the best wood possible to manufacture these Bokken and Jo, the processing time is longer than for varnished weapons. Please note that the oil polish can darken the wood significantly.
Kujiragata Tonfa Specifications Wood Ichiikashi/Akagashi
Weight 520 ~ 560 g Full length 43 cm, 46 cm, 49 cm or 52 cm Square section width 36 mm x 36 mm Handle length Standard: ~12 cm
Large: ~14 cm
Handle diameter (at its center) Standard: ~26 mm
Large: ~29 mm
* Due to the hand-made manufacturing, color and weight may vary from one weapon to another
Tonfa Order DisclaimerTonfa can be considered as weapons in some countries. Although, by experience, we know there is no problem with North America and most European countries, we recommend checking that the import of Tonfa is not prohibited in your country before placing your order.
Tonfa are made to order and Seido shall not be held responsible for any difficulties, import refusal or other trouble at customs clearance. In the event of this occurring, only limited refunds (depending on the level of customization) can be granted.
Also, please note that due to international payment regulations, PayPal payment is not available at checkout when ordering a Tonfa or a Nunchaku. If you wish to purchase other products at the same time and use PayPal, we recommend to order the Tonfa or Nunchaku separately. We can still ship all items together if the orders are placed within a few hours and a comment is added in the comment field.