|Available fonts (style)||4 Japanese fonts, 3 English fonts|
|Depth||The stronger the laser, the deeper the engraving. Superficial is quite discreet, standard is deep enough to stand forever, deep can go up to 1 mm depth and creates a burning effect within the engraving.|
|Free transcriptions||You can write your name in English and select a "Japanese" font, in which case we will take care of the transcription. Note that several translations exist for the same name and that we cannot accept claims. (Please use the text field to add a comment if the pronunciation is unusual. If you already have a translation, please attach a picture). We do not translate expressions or initials, only names or words. Requests for expressions translations will be ignored and refunded. Please also note that initials cannot be translated in Japanese. Consequently, they will always be engraved in English.|
|Number of engravings||
You can order a maximum of 3 engravings per weapon from this page. The modules N1, N2, and N3 correspond to the engravings Number 1, number 2 and number 3. These modules are identical and you can add them in the order you wish. Of course, we cannot engrave twice in the same place, so please pay attention to the chosen positions.
For more than 3 engravings, please contact us prior to placing your order.
|Limitations||We engrave in Japanese and English only (no Chinese, Korean, etc.) For any special request (logo/design), contact us prior to your order. (Undiscussed demands will be ignored).|
|More information||Embroidery workshop & Japanese free translation (on site), Transcription usages (Seido Blog), and the engraving workshop presentation (Youtube)|
Prices and production time vary depending on selected options.
Camellia Oil - Tsubaki abura
Made in Japan (Isu Islands)
Ingredient: 100% Tsubaki Oil
Size: 70 mL (2,3 oz) / 118 mL (3.9 oz) / 1 L (33.8 oz) / 1.8 L (60.9 oz)
This oil has been produced on the island of Toshima (Isu Shoto), off Tokyo, for more than a century. It is used by many Japanese wood workers as well as specialists in ancient blade (shinken) who are looking for a more stable oil than the Choji oil.
The 70 and 118 mL are conditionned in glass bottles. 1 and 1.8 L are conditionned in metal cans. Cans are not available in stock and require about a week before shipping.
Treatment with Camellia oil is recommended by the craftsmen who make our wooden weapons. The regular oiling is necessary for unvarnished weapons. It is recommended also for the maintenance of Iaito and Shinken.
Utilization on wooden weapons:
Once every 2 months in the wet season, 2 times per month during dry season. For a better preservation of your weapons, it is advisable to carefully rub them with a dry cloth after each use. When you apply the oil, clean the wood surface by rubbing vigorously with a dry cloth, then apply the oil in a thin layer directly with the hand. Allow to dry.
If your weapons are not painted it will not be necessary to sand, but if they are, sanding will help the wood to absorb more oil.
Note that this Camelia oil is initialy intended for skin and hair care. We've selected this oil for it's unmatched quality: 100% pure camelia oil, no additive, cold pressed, cosmetic grade, almost odorless, and halal certified.
Production time vary depending on selected options.
Cotton / Linen Cover for 6 Shaku Bo
Made in Japan
Material: Cotton & Linen
Length: 195 cm | Weight: 100 g
Available color: brown only
Solid cotton and linen cover for Bo transport and protection. This model can accommodate a standard 6 shaku bo, or a short 5 shaku bo but also for a bit longer custom models up to 185 cm. Synthetic leather reinforcements are fitted at the bottom of the cover and a small pocket for adding a name plate is sewn onto the upper part.. Completed with two strings made from the same cotten/linen fabric, one on the top to tie the cover up and one in the middle to secure the bo.
Product Information & Size Chart
5 and 6 Shaku Deluxe Tapered Bo
Made in Japan (Kyushu region)
Available woods: Red Oad & White Oak
Lenght: 5 Shaku (151.5 cm) or 6 Shaku (181.8 cm)
Diameter: 27 mm (9 bu) or 30 mm (1 sun).
Finish : urethan coated or oil polishing
This tapered Bo is available in Ichiikashi (red oak) and Shirakashi (white oak), either varnished or unvarnished (oil polishing). The length is a standard 6 shaku (181.8 cm), or a slightly shorter 5 shaku (151.5 cm) available in 27 mm or 30 mm diameter at the center. The ends are tapered for a standard 24 mm diameter (8 bu).
The red and white oak models will sustain violent contacts during practice.
Tapered Bo are mainly used in Okinawa Kobudo (Karate) and Ninjutsu.
- Choice of wood species: red oak or white oak
- Diameter at center: 27 mm (9 bu) or 30 mm (1 sun).
- Diameter at the ends: 24 mm (8 bu).
- Available finish: Urethane varnish or camellia oil polish.
Manufacturing workshop: Aramaki
BO CAN ONLY BE SHIPPED THROUGH UPS/FEDEX (Includes Asia, North America and Europe). For other countries, please contact us prior to placing your order.
Non varnished - Oil polish option:
Urethane varnish is the "classic" finish for wooden weapons. This varnish protects the wood from moisture or drought, but the touch will be less pleasant than that of unvarnished weapons. When the wood is not varnished, it is necessary to treat it regularly (every two months on average) with oil (camellia, walnut, or linseed oil). Unvarnished weapons are meticulously polished with a fine grain sandpaper, which, in addition to the oiling work done by our team before shipping, justifies the extra charge. Only quality weapons can withstand a Japanese oil finish instead of varnishing. This is the finish we recommend to the most demanding practitioners.
Tapered Bo - Weights Wood Ichiikashi (Red Oak) Shirakashi (White Oak) 5 Shaku / 27 mm ~700 g ~800 g 5 Shaku / 30 mm ~800 g ~900 g 6 Shaku / 27 mm ~800 g ~900 g 6 Shaku / 30 mm ~900 g ~1,000 g
*Weapons are all handmade, therefore color and weight can vary slightly
We rigidly sort through all our in stock products, selecting and finally selling only what meets our standards. Of all the wooden weapons we receive, 10 to 15% are eliminated and mostly destroyed. We are proud of the fact that our quality control is the strictest on the market.
However, we cannot offer such a sorting for custom made products and those can therefore show minor flaws like a slight curvature.